View 2504021007Y0_136585.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

15th Edition
27
Board Components
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
67
Engineering Kits
Expanded Cable & Suppressor Kit Part Number 0199000005 This is our most popular engineering kit. As the name implies, this kit contains a broad sampling of suppression cores to reduce conducted EMI over wires and cables. Chip Bead Kit Part Number 0199000018 The chip bead kit has a number of different EIA size chip components with a range of impedance values and signal speeds. Also one of our chip arrays is included in this kit. Parts are RoHS compliant. Shield Bead Kit Part Number 0199000019 The shield bead kit has 28 different beads in three suppression materials, 73, 43, and 61. Antenna/RFID Kit Part Number 0199000024 The kit contains a range of rods in three low losses, high Q, materials, 78, 61 and 67, to cover frequencies from 10 kHz to 50 MHz. Surface Mount Bead Kit Part Number 0199000025 An assortment of surface mount beads for differential and common-mode applications in 73 material for < 50 MHz, 43/44 material for 25-300 MHz and 52/61 material for 250-1000 MHz frequencies. Parts are RoHS compliant. Wound Bead Kit Part Number 0199000027 The wound bead kit has twelve wound beads in two suppression materials, 44 and 61, wound in several winding configurations. Parts are RoHS compliant. Bead-On-Lead Kit Part Number 0199000028 This bead-on-lead kit has three parts each in three materials, 73, 43 and 61, for through hole applications. Parts are RoHS compliant.
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
68
15th Edition
Engineering Kits
Rod Kit (52 Matl) Part Number 0199000029 A new rod kit in the new 52 material. Samples of seven sizes intended for open circuit applications that require a ferrite material with high saturation and Curie temperature. 31 Snap-It Kit Part Number 0199000030 This 31 material snap-it kit has a range parts for different cable diameters. Suggested operating frequency 1-300 MHz. 43 Snap-It Kit Part Number 0199000031 Snap-it assemblies suitable for the 25-300 MHz frequency range. Can accommodate cable diameters from .250 to .590 inches. 46 Core and Snap-It Kit Part Number 0199000032 This kit has a selection of cable cores and snap-its in our new economical 46 material. This material has similar performance as our 43/44 grade materials over the 25-300 MHz frequency range. 61 Snap-It Kit Part Number 0199000033 Our recommendation for suppressing conducted EMI in 200-1000 MHz is the 61 material. This kit has a selection of 61 snap-its. Chip Inductor Kit Part Number 0199000035 The chip inductor kit has several EIA sizes in both ferrite and ceramic chip inductors. Parts are RoHS compliant. Multi-Aperture Core Kit Part Number 0199000036 Kit contains several sizes in four materials, 73, 43, 61 and 67. This allows experimentation from a few kHz into the 50-100 MHz range.
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
28
15th Edition
Solder Profile
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
38
15th Edition
PC Beads (Surface Mount)
Surface mount PC Beads are supplied in two suppression materials. SMPC Beads are available for 3, 4 and 5 line designs in the high resistivity 44 material for broadband applications and for the higher frequencies in the new 52 material grade. Surface mount PC Beads are supplied taped and reeled on 13" reels per EIA 481 and IEC 60286 standards. These beads can also be supplied not taped and reeled and then are bulk packed. This packing method will change the last digit of the part number to a "6". * The flat wire conductors are oxygen free high conductivity copper, 0.30 x 0.65 mm (.012 x .025"), and a lead-free tin coating. If required
SMPC Beads can be supplied with same size copper conductors but with a tin/lead coating. See page 28 for suggested solder profile for lead-free components * The SMPC Beads can withstand a minimum breakdown voltage of 750 Vdc between wires. Leads co-planarity is < 0.10 mm (.004"). * SMPC Beads are controlled for impedance only. The impedances listed are typical values. Minimum impedance values are specified for the + marked frequencies. The minimum guaranteed impedance is the listed impedance less 20%. The 44 material beads are measured on the 4193A vector Impedance Analyzer. The 52 beads are tested for impedance on the 4191A RF Impedance Analyzer. * SMPC Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. o * After preheating the SMPC Beads to within 100 C of the soldering temperature, the beads will meet the resistance to soldering o requirements of EIA-186-10E, temperature 260 +/- 5 C and time of 10 +/- 1 seconds. o o * Recommended storage and operating temperature range is -55 C to 125 C. * Suggested land patterns are in accordance with the latest revision of IPC-7351. * The maximum current rating for the SMPC Beads is 5 amps. The flat wire cross-sectional area is 5% less than the 24 AWG wire size. * For equivalent PC Beads for through hole designs see pages 36 and 37. * Performance curves of all SMPC Beads are compiled on the Fair-rite Products CD-ROM. * Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled.
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
39
PC Beads (Surface Mount)
Figure 1
Figure 2
Figure 3
www..com
Land Pattern
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
40
15th Edition
PC Beads (Surface Mount)
Broadband Frequencies 10-300 MHz (44 material)
Dimensions (Bold numbers are in millimeters, light numbers are nominal in inches.)
Part Number Fig. A
8.0 - 0.35 .308 8.0 - 0.35 .308 11.2 - 0.5 .430 11.2 - 0.5 .430 11.2 - 0.5 .430 11.2 - 0.5 .430 13.450.25 .530 13.450.25 .530
B max
8.6 .338 8.6 .338 6.75 .265 6.75 .265 12.2 .480 12.2 .480 12.2 .480 12.2 .480
C max
11.8 .464 7.0 .275 11.8 .464 7.0 .275 11.8 .464 7.0 .275 11.8 .464 7.0 .275
D
2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102
E
2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100
Wt (g)
Tape Width mm
Pitch mm
Parts/Reel
2744776147 2744786147 2744778147 2744788147 2744778347 2744788347 2744770347 2744780347
1 1 2 2 2 2 3 3
2.6 1.5 2.7 1.6 7.0 3.5 7.4 4.4
24 24 16 16 24 24 24 24
16 16 20 20 20 20 24 24
300 600 250 500 250 500 200 450
Higher Frequencies 250-1000 MHz (52 material)
Tape Width mm Pitch mm
Part Number
Fig.
A
8.0 - 0.35 .308 8.0 - 0.35 .308 11.2 - 0.5 .430 11.2 - 0.5 .430 11.2 - 0.5 .430 11.2 - 0.5 .430 13.450.25 .530 13.450.25 .530
B max
8.6 .338 8.6 .338 6.75 .265 6.75 .265 12.2 .480 12.2 .480 12.2 .480 12.2 .480
C max
11.8 .464 7.0 .275 11.8 .464 7.0 .275 11.8 .464 7.0 .275 11.8 .464 7.0 .275
D
2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102 2.60.6 .102
E
2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100 2.540.1 .100
Wt (g)
Parts/Reel
2752776147 2752786147 2752778147 2752788147 2752778347 2752788347 2752770347
1 1 2 2 2 2 3
2.6 1.5 2.7 1.6 7.0 3.5 7.4 4.4
24 24 16 16 24 24 24 24
16 16 20 20 20 20 24 24
300 600 250 500 250 500 200 450
2752780347 3 www..com
Click on part number for performance curves.
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
41
PC Beads (Surface Mount)
Broadband Frequencies 10-300 MHz (44 material)
Part Number Typical Impedance( ) Max 10 MHz 25 MHz+ 100 MHz+ 250 MHz Rdc(m ) Land Pattern Dimensions V 2.0 .079 2.0 .079 2.0 .079 2.0 .079 5.0 .197 5.0 .197 5.0 .197 5.0 .197
W (ref.)
6.0 .236 6.0 .236 5.0 .197 5.0 .197 9.5 .374 9.5 .374 9.5 .374 9.5 .374
X
1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039
Y
4.0 .158 4.0 .158 3.0 .118 3.0 .118 4.5 .177 4.5 .177 4.5 .177 4.5 .177
Z 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100
2744776147 2744786147 2744778147 2744788147 2744778347 2744788347 2744770347 2744780347
115 66 115 66 142 76 142 76
188 95 188 95 219 110 219 110
288 150 288 150 338 175 338 175
305 155 305 155 335 180 335 180
3.0 1.9 3.0 1.9 3.5 2.4 3.5 2.4
Higher Frequencies 250-1000 MHz (52 material)
Part Number Typical Impedance( ) Max 100 MHz 250 MHz+ 500 MHz+ 1000 MHz Rdc(m ) Land Pattern Dimensions V 2.0 .079 2.0 .079 2.0 .079 2.0 .079 5.0 .197 5.0 .197 5.0 .197 5.0 .197
W (ref.)
6.0 .236 6.0 .236 5.0 .197 5.0 .197 9.5 .374 9.5 .374 9.5 .374 9.5 .374
X
1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039 1.0 .039
Y
4.0 .158 4.0 .158 3.0 .118 3.0 .118 4.5 .177 4.5 .177 4.5 .177 4.5 .177
Z 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100 2.54 .100
2752776147 2752786147 2752778147 2752788147 2752778347 2752788347 2752770347 2752780347
270 125 270 125 320 150 320 150
380 180 380 180 460 220 460 220
345 180 345 180 395 220 395 220
250 170 250 175 300 210 300 210
3.0 1.9 3.0 1.9 3.5 2.4 3.5 2.4
www..com Click on part number for performance curves.
+ Test frequency
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
47
SM Beads (Differential-Mode)
Surface mount beads are available from Fair-Rite in several materials and sizes. Their rugged construction lowers the dc resistance and increases current carrying capacity compared to plated beads.
* SM Beads on 12mm tape width are supplied taped and reeled per EIA 481-1 and IEC 60286-3 standards. SM Beads on 16 and 24mm tape widths are supplied taped and reeled per EIA 481-2 and IEC 60286-3 standards. Taped and reeled parts are supplied on a 13" reel. * SM Beads can also be supplied not taped and reeled and then are bulk packed. This packing method will change the last digit of the part number to a "6". * The copper conductors have a lead-free tin coating. If required SM Beads can be supplied with copper conductors having a tin/lead coating. See page 28 for suggested solder profile for lead-free components. * SM Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. After dipping the mounting site of the bead, the solder surface shall be at least 95% covered with a smooth solder coating. The edges of the copper strip are not specified as solderable surfaces. o * After preheating the beads to within 100 C of the soldering temperature, the parts meet the resistance to soldering requirements of o EIA-186-10E, temperature 2605 C and time 101 seconds. * Suggested land patterns are in accordance with the latest revision of IPC-7351. * SM Beads are controlled for impedance limits only. The impedances listed are typical values. Minimum impedance values are specified for the + marked frequencies. The minimum guaranteed impedance is the listed value less 20%. SM Beads in 73, 43 and 44 materials are measured for impedance on the 4193 Vector Impedance Analyzer. The 52 and 61 SM Beads are tested for impedance on the 4191A RF Impedance Analyzer. o o * Recommended storage and operation temperature is -55 C to 125 C. * The maximum current rating for these SM Beads is 5 amps. * Performance curves of all the SM Beads are compiled on the Fair-Rite Products CD-ROM. * For any SM Bead requirement not listed, please contact our customer service group for availability and pricing. * Our "Surface Mount Bead Kit" (part number 0199000025) is available for prototype evaluation. See page 67. * Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled.
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
48
15th Edition
SM Beads (Differential-Mode)
Lower Frequencies < 50 MHz (73 material)
Dimensions (Bold numbers are in millimeters, light numbers are nominal in inches.)
Part Number Fig. A 2.850.2 .112 2.850.2 .112 2.700.2 .106 1.75 Max. .068 Max. B C D 1.50.5 .059 1.50.5 .059 1.40.4 .055 1.550.5 .061 E Wt (g) Tape Width mm Pitch mm Parts/Reel
2773019447 2773021447 2773037447 2773044447
1 1 1 1
3.050.1 5.1 - 0.85 .120 .184 3.050.1 9.6 - 0.95 .120 .359 4.60.2 .181 3.10.1 .122 9.25 - 0.7 .350 5.650.45 .222
.15 .30 .45 .09
12 16 16 12
8 8 8 8
2800 2800 2800 4500
Broadband Frequencies 25-300 MHz (43 & 44 material)
Dimensions (Bold numbers are in millimeters, light numbers are nominal in inches.)
Part Number Fig. A 2.850.2 .112 B C D 1.50.5 .059 1.50.5 .059 1.40.4 .055 1.550.5 .061 1.40.4 .055 2.50.5 .098 2.50.5 .098 E Wt (g) Tape Width mm Pitch mm Parts/Reel
2743019447 2743021447 2743037447 2744044447 2744040447 2744555567 2744555577
1 1 1 1 2 4 3
3.050.1 5.1 - 0.85 .120 .184 9.6 - 0.95 .359 9.25 - 0.7 .350 5.650.45 .222 6.4 - 0.6 .240 11.0 Max. .433 Max. 11.0 Max. .433 Max.
.15 .30 .45 .09
1.270.05 .050
12 16 16 12 12 24 24
8 8 8 8 8 12 12
2800 2800 2800 4500 4000 1500 1500
2.850.2 3.050.1 .112 .120 2.700.2 4.60.2 .106 .181 1.75 Max. 3.10.1 .068 Max. .122 1.95 Max 4.50.2 .076 Max .177 5.0 Max. 5.000.25 .197 .197 Max. 5.0 Max. 5.000.25 .197 .197 Max.
.14 .96 .96
Higher Frequencies 250-1000 MHz (52 & 61 material)
Dimensions (Bold numbers are in millimeters, light numbers are nominal in inches.)
Part Number Fig. A B C D 1.50.5 .059 1.50.5 .059 2.50.5 .098 2.50.5 .098 E Wt (g) Tape Width mm Pitch mm Parts/Reel
2761019447
1
2761021447 www..com 1 2752555567 2752555577 4 3
2.850.2 3.050.1 5.1 - 0.85 .120 .112 .184 2.850.2 3.050.1 9.6 - 0.95 .120 .112 .359 5.0 Max. 5.000.25 11.0 Max. .197 .197 Max. .433 Max. 5.0 Max. 5.000.25 11.0 Max. .197 .433 Max. .197 Max.
.15 .30 .96 .96
12 16 24 24
8 8 12 12
2800 2800 1500 1500
Click on part number for performance curves.
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
49
SM Beads (Differential-Mode)
Lower Frequencies < 50 MHz (73 material)
Part Number 1 MHz Typical Impedance( ) 5 MHz 10 MHz+ 25 MHz+ Max Rdc(m ) Land Pattern Dimensions V 1.0 .040 4.5 .177 5.0 .197 1.5 .059 W (ref.) 4.0 .157 7.5 .295 8.0 .315 4.5 .177 X 1.8 .071 1.8 .071 1.8 .071 1.8 .071 Y 3.0 .118 3.0 .118 3.0 .118 3.0 .118 Z
2773019447 2773021447 2773037447 2773044447
12 25 25 9
25 50 50 19
31 60 60 25
40 78 78 33
0.8 1.2 1.2 1.1
Broadband Frequencies 25-300 MHz (43 & 44 material)
Part Number Typical Impedance( ) Max + 100 MHz+ 250 MHz Rdc(m ) 10 MHz 25 MHz Land Pattern Dimensions V 1.0 .040 4.5 .177 5.0 .197 1.5 .059 1.8 .071 2.0 .079 2.0 .079 W (ref.) 4.0 .157 7.5 .295 8.0 .315 4.5 .177 4.8 .189 7.0 .276 7.0 .276 X 1.8 .071 1.8 .071 1.8 .071 1.8 .071 0.8 .032 2.0 .079 2.0 .079 Y 3.0 .118 3.0 .118 3.0 .118 3.0 .118 3.0 .118 5.0 .197 5.0 .197 Z
2743019447 2743021447 2743037447 2744044447 2744040447 2744555567 2744555577
18 37 37 13 18 150 255
29 56 56 21 29 250 425
47 95 95 36 56 375 600
49 100 100 39 60 385 575
0.8 1.2 1.2 1.1 1.6 3.8 6.2
1.27 .050
Higher Frequencies 250-1000 MHz (52 & 61 material)
Part Number 100 MHz Typical Impedance( ) Max 250 MHz+ 500 MHz+ 1000 MHz Rdc(m ) Land Pattern Dimensions V 1.0 .040 4.5 .177 2.0 .079 2.0 .079 W (ref.) 4.0 .157 7.5 .295 7.0 .276 7.0 .276 X 1.8 .071 1.8 .071 2.0 .079 2.0 .079 Y 3.0 .118 3.0 .118 5.0 .197 5.0 .197 Z
2761019447 2761021447
36 69
50 94
55 106
59 118
0.8 1.2 3.8 6.2
www..com 2752555567
2752555577
400 700
490 770
425 440
250 250
Click on part number for performance curves.
+ Test frequency
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
50
15th Edition
SM Beads (Differential-Mode)
C D A B Figure 1
Flat TCW 1.27 (.050)W x 0.2 (.008) T
Wref V
X
Y
Land Pattern for Fig. 1
C D
Flat TCW 0.5 (.020)W x 0.25 (.010) T E X
Wref V
Z
A
B Figure 2 Y Land Pattern for Fig. 2 E=Z
C D A 0.53 24 AWG Y B X
Wref V
Figure 3
Land Pattern for Fig. 3
C D A X
Wref V
www..com
0.53 24 AWG Figure 4 B
Y
Land Pattern for Fig. 4
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
51
SM Beads (Common-Mode)
Surface mount common-mode beads are available from Fair-Rite in several materials and sizes. The commonmode bead provides a common magnetic path for the flux generated by the current to the load and the return current from the load. The current compensation results in zero magnetic flux in the bead.
* SM Beads on 12mm tape width are supplied taped and reeled per EIA 481-1 and IEC 60286-3 standards. SM Beads on 16 and 24 mm tape widths are supplied taped and reeled per EIA 481-2 and IEC 60286-3 standards. Taped and reeled parts are supplied on a 13" reel. * SM Beads can also be supplied not taped and reeled and then are bulk packed. This packing method will change the last digit of the part number to a "6". * The copper conductors have a lead-free tin coating. If required SM Beads can be supplied with copper conductors having a tin/lead coating. See page 28 for suggested solder profile for lead-free components. * SM Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. After dipping the mounting site of the bead, the solder surface shall be at least 95% covered with a smooth solder coating. The edges of the copper strip are not specified as solderable surfaces. o * After preheating the beads to within 100 C of the soldering temperature, the parts meet the resistance to soldering requirements of o EIA-186-10E, temperature 2605 C and time 101 seconds. * Suggested land patterns are in accordance with the latest revision of IPC-7351. * SM Beads are controlled for impedance limits only. The impedances listed are typical values. Minimum impedance values are specified for the + marked frequencies. The minimum guaranteed impedance is the listed value less 20%. SM Beads in 44 materials are measured for impedance on the 4193 Vector Impedance Analyzer. The 52 SM Beads are tested for impedance on the 4191A RF Impedance Analyzer. o o * Recommended storage and operation temperature is -55 C to 125 C. * The maximum current rating for these SM Beads is 5 amps. * Performance curves of all the SM Beads are compiled on the Fair-Rite Products CD-ROM. * For any SM Bead requirement not listed, please contact our customer service group for availability and pricing. * Our "Surface Mount Bead Kit" (part number 0199000025) is available for prototype evaluation. See page 67. * Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, last digit 6 = bulk packed, 7 = taped and reeled.
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
52
15th Edition
SM Beads (Common-Mode)
Broadband Frequencies 10-300 MHz (44 material)
Dimensions (Bold numbers are in millimeters, light numbers are nominal in inches.)
Part Number Fig. A 2.850.2 .112 2.850.2 .112 4.5 Max. .177 Max. 5.3 Max. .209 Max. B 5.60.2 .220 5.60.2 .220 6.65 Max. .262 Max. 7.00 Max. .275 Max. C D E 2.540.1 .100 2.540.1 .100 3.000.1 .118 3.000.1 .118 Wt (g) Tape Width mm Pitch mm Parts/Reel
2744041447 2744045447 2744051447 2744065447
1 1 2 2
5.0 - 0.6 1.350.5 .053 .185 8.9 - 0.8 1.350.5 .053 .335 12.0 Max. 2.50.5 .098 .472 Max. 14.8 Max. 2.50.5 .582 Max. .098
.30 .53 1.0 1.8
12 16 24 24
8 8 12 12
2400 2400 1000 1000
Higher Frequencies 250-1000 MHz (52 material)
Part Number Fig. A 2.850.2 .112 2.850.2 .112 4.5 Max. .177 Max. 5.3 Max. .209 Max. B 5.60.2 .220 5.60.2 .220 6.65 Max. .262 Max. 7.00 Max. .275 Max. C D E 2.540.1 .100 2.540.1 .100 3.000.1 .118 3.000.1 .118 Wt (g) Tape Width mm Pitch mm Parts/Reel
2752041447 2752045447 2752051447 2752065447
1 1 2 2
5.0 - 0.6 1.350.5 .053 .185 8.9 - 0.8 1.350.5 .053 .335 12.0 Max. 2.50.5 .098 .472 Max. 14.8 Max. 2.50.5 .582 Max. .098
.30 .53 1.0 1.8
12 16 24 24
8 8 12 12
2400 2400 1000 1000
Click on part number for performance curves.
Flat TCW 1.27 (.050)W x 0.15 (.006) T C D E X
Wref V Z A E B
D X
Wref V Z Y 0.53 (27XX051447) 24 AWG 0.57 (27XX065447) 23 AWG Land Pattern for Fig. 2 E=Z
A
B
Y
C
www..com
Figure 1 Common-Mode Bead Land Pattern for Fig. 1 E=Z Figure 2 Common-Mode Bead
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
53
SM Beads (Common-Mode)
Broadband Frequencies 10-300 MHz (44 material)
Part Number Typical Impedance( ) Max 25 MHz+ 100 MHz+ 250 MHz Rdc(m ) 10 MHz Land Pattern Dimensions V 1.0 .040 4.0 .158 4.0 .158 6.8 .268 W (ref.) 4.0 .157 7.0 .276 9.0 .354 11.8 .465 X 1.8 .071 1.8 .071 1.0 .040 1.1 .043 Y 3.0 .118 3.0 .118 5.0 .197 5.0 .197 Z 2.54 .100 2.54 .100 3.0 .118 3.0 .118
2744041447 2744045447 2744051447 2744065447
12 23 60 95
20 38 100 145
33 60 230 255
41 78 275 @300MHz 375 @300MHz
1.1 1.4 4.0 4.1
Higher Frequencies 250-1000 MHz (52 material)
Part Number Typical Impedance( ) 100 MHz Max 250 MHz+ 500 MHz+ 1000 MHz Rdc(m ) Land Pattern Dimensions V 1.0 .040 4.0 .158 4.0 .158 6.8 .268 W (ref.) 4.0 .157 7.0 .276 9.0 .354 11.8 .465 X 1.8 .071 1.8 .071 1.0 .040 1.1 .043
+
Y 3.0 .118 3.0 .118 5.0 .197 5.0 .197
Z 2.54 .100 2.54 .100 3.0 .118 3.0 .118
2752041447 2752045447 2752051447 2752065447
32 58 200 230
50 90 330 390
63 115 400 460
70 130 350 380
1.1 1.4 4.0 4.1
Click on part number for performance curves.
Test frequency
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
54
15th Edition
Chip Beads
Fair-Rite offers a broad selection of cost effective chip beads to suppress conducted EMI in a wide variety of devices such as cellular phones, computers, laptops, pagers, etc. The small standard package sizes accommodate automated installation and allow for a dense packaging of circuit boards. Chip beads are 100% tested for impedance and dc resistance. They are available in standard, high and GHz signal speeds. Chip beads are organized and listed by increasing current carrying capacity.
* All multi-layer chip beads are supplied taped and reeled, if required bulk packed chip beads can be provided. See table on the next page with tape and reel particulars. * Chip beads are controlled for impedance. The impedance values listed are typical values. A nominal impedance with a +/- 25% tolerance is specified for the + marked frequency. * Chip beads are measured for impedance on the HP 4291A and fixture HP 16192A. * Chip beads can accommodate both reflow and wave soldering technologies. See page 28 for the recommended soldering profile for chip components. * Suggested land patterns are in accordance to the latest revision of IPC-7351. * Chip beads have plated contacts, 100% tin over a nickel undercoating. * Recommended storage and operating temperature range is -55oC to 125oC. * Performance curves for all listed chip beads, with and without dc bias, are on the Fair-Rite Products CD-ROM. * Our "Chip Bead Kit" (part number 0199000018) is available for prototype evaluation. See page 67.
Part Number System: Example 2512063017Y1
25 1206 301 7 Y Material Code Y = Standard Signal Speed Z = High Signal Speed H = GHz Speed 1 Current Code 0 < 1.0A 1 > 1.0A < 2.0A 3 > 3.0A < 4.0A ETC Chip Package Impedance Packaging Bead Size Code Code Code Code 6= Bulk Packed 7= Taped and Reeled 7" Reel 8= Taped and Reeled 13" Reel
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
55
Chip Beads
Land Patterns V W ref
1.30 .051 1.70 .067 1.90 .075 2.80 .110 3.90 .154 3.90 .154
X
0.70 .028 1.00 .039 1.50 .059 1.80 .071 1.80 .071 3.40 .134
Y
0.90 .035 1.10 .043 1.30 .051 1.60 .063 1.90 .075 1.90 .075
Tape Width mm 8 8 8 8 12 12
Pitch mm 4 4 4 4 8 8
Parts per Reel 7" 10,000 4,000 4,000 3,000 2,000 1,000 13" N/A 10,000 10,000 10,000 10,000 5,000
0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1806 (4516) 1812 (4532)
0.50.15 0.50.15 1.00.15 0.250.15 0.002 .020 .020 .040 .010 0.80.3 .031 0.90.2 .035 1.10.2 .043 1.60.2 .063 0.80.3 1.60.15 0.40.2 .031 .063 .016 1.250.2 2.00.2 .049 .079 1.60.2 .063 1.60.2 .063
0.40 .016 0.60 .024 0.60 .024 1.20 .047 2.00 .079 2.00 .079
0.006 0.01 0.03 0.06 0.09
0.50.3 .020
3.20.2 0.70.3 .126 .028 4.50.2 0.70.3 .028 .177
1.60.2 .063
3.20.2 .126
4.50.2 0.70.3 .028 .177
C
B
A
D
Side View Land Pattern
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
56
15th Edition
Chip Beads

www..com

Click on part number for performance curves.

Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
57
Chip Beads
Current
2512063007Y0 2512065007Y0 2512067007Y0 2512069007Y0 2512061017Y0 2512061217Y0 2512063017Y0 2512066017Y0 2512061027Y0 2512061527Y0 2518061017Y0 2518061517Y0 2506033007Y3 2506036007Y3 2506031217Y2 2508053007Y3 2508056007Y3 2508051217Y3 2508053017Y3 2508056017Y2 2508051027Y1 2508052027Y1 2512063007Y3 2512065007Y3 2512067007Y3 2512061517Y3 2512063017Y3 2512066017Y1 2512061027Y1 2518066007Y3 2518068007Y3 2518127007Y3 2518121217Y3 2508056007Y6 2508051217Y6 2512065007Y6 2512061217Y5 2518065007Y6 2518061017Y6 2518121217Y6
Low
1206 Standard (3216)
1806 (4516) Standard 0603 Standard (1608)
Z ( ) Z ( ) 25% Z ( ) Z( ) Max. ( ) 50 MHz 100 MHz+ 500 MHz 1000 MHz 0.1 52 21 30 49 0.15 67 38 50 68 102 53 70 101 0.15 113 72 90 121 0.2 86 72 100 127 0.2 109 87 120 151 0.2 118 203 300 233 0.2 67 581 600 116 0.25 117 784 1000 230 0.35 1500 1500 200 250 0.4 100 155 73 153 0.3 150 167 110 205 0.5 30 41 23 40 0.04 60 81 48 84 0.04 120 152 90 170 0.05 30 41 23 41 0.03 49 91 239 449 764 599 24 39 53 120 212 460 925 44 64 54 92 47 94 39 96 36 75 92 60 120 300 600 1000 2000 30 50 70 150 300 600 1000 60 80 70 120 60 120 50 120 50 100 120 84 165 218 293 402 350 40 69 102 173 150 260 210 91 114 96 150 88 158 68 137 63 139 149 84 135 117 159 216 189 38 70 103 130 88 120 117 94 114 96 106 68 132 56 91 61 132 105
0.04 0.05 0.05 0.1 0.3 0.3 0.03 0.03 0.04 0.05 0.06 0.08 0.30 0.04 0.04 0.04 0.04 0.02 0.025 0.02 0.025 0.01 0.02 0.02
Max Cur. mA 800 800 500 450 450 450 350 350 350 350 400 200 3000 3000 2000 3000
3000 3000 3000 2000 1000 1000 3000 3000 3000 3000 3000 1000 1000 3000 3000 3000 3000 6000 6000 6000 5000 6000 6000 6000
0805 Standard (2012)
Medium
1206 Standard (3216)
1806 (4516) Standard 1812 Standard (4532) 0805 (2012) www..com 1206 High (3216) 1806 (4516) 1812 Standard Standard Standard Standard
Click on part number for performance curves.
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
+ Test frequency
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
58
15th Edition
Chip Arrays
Fair-Rite offers an effective cost and real estate reduction by our line of chip arrays. Four chip beads, packaged in a 1206 (3216) size, for suppression of conducted EMI where size is at a premium. Chip arrays are 100% tested for impedance and dc resistance. They are available in standard and high signal speeds.
* Chip arrays have plated contacts, 100% tin over a nickel undercoating. * Chip arrays are supplied taped and reeled, if required bulk packed arrays can be supplied. For particulars on the taped and reeled parts see the Part Number System below. * Chip arrays are controlled for impedance. The impedance values listed are typical values. The nominal impedance with a +/- 25% tolerance is specified for the + marked 100 MHz frequency. Chip arrays are measured for impedance on the HP 4291A and fixture HP 16192A. * The arrays can accommodate both reflow and wave soldering technologies. See page 28 for the recommended soldering profile for lead-free chip components. * Suggested land patterns are in accordance to the IPC-7351. o o * Recommended storage and operating temperature range is -55 C to 125 C. * Performance curves for the chip arrays, with and without dc bias, are on the Fair-Rite Products CD-ROM. * "Chip Bead Kit" (part number 0199000018) contains the high speed 220 ohm 4 line chip array. See page 67.
Part Number Sytem: Example 2512066007Y0A4
25
Chip Suppression Component
1206
Package Size
600
Impedance Code 600 = 60
7
Packaging Code 6 = Bulk Packed 7 = T&R
Y
Material Code Y = Std Signal Speed Z = GHz Speed
0
Current Code 0 < 1A
A4
Array 4 Lines
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
59
Chip Arrays
C B E F A D
Land Pattern
Pkg. Dimensions Size 1206 mm inches
A
0.80.2 .031
B 1.60.2 .063
C 3.20.2 .126
D 0.30.2 .011
E 0.80.1 .031
F 0.40.15 .016
Wgt (g) 0.03
Land Pattern V
mm inches
W ref
X 0.5 .020
Y 0.6 .024
Z 0.8 .032
Reel Information Tape Width Pitch Parts per mm mm 7" reel 8 4 3000
0.7 1.3 .028 .051
Part Number
Speed
Z () 50 MHz
Z () 25% 100 MHz
Z () Z () 500 MHz 1000 MHz
Max Max DCR Current () (mA)
2512066007Y0A4 Standard 2512061217Y0A4 Standard 2512063017Y0A4 Standard 2512066017Y0A4 Standard 2512061027Y0A4 Standard 2512061217Z0A4 High Speed 2512062217Z0A4 High Speed
48 95 225 460 770 68 95
60 120 300 600 1000 120 220
77 150 280 400 400 215 360
75 118 160 205 200 205 205
0.25 0.3 0.3 0.5 0.7 0.3 0.45
200 150 150 100 50 200 150
www..com
Click on part number for performance curves.
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
60
15th Edition
Chip Inductors
Multi-Layer chip inductors have complimented our line of chip components. These chip inductors have silk-screened windings on a ferrite or non- magnetic ceramic body which after sintering forms a monolithic structure which is a self shielding, closed magnetic unit. Chip inductors come in two types, with a ferrite body and with a non-magnetic ceramic core. Both types provide excellent solderability and heat resistance for either flow or reflow soldering processes. Both chip inductor types are used in tuned applications and for energy storage devices for frequencies in the hundreds of MHz into the GHz range.
* Chip inductors are supplied taped and reeled, if required bulk packed parts can be supplied. See table on the next page for tape and reel particulars. * Chip inductors are 100% tested for a toleranced inductance and minimum Q at specified test frequencies. * Suggested land patterns are in accordance to the latest revision of IPC-7351. * Chip inductors have plated contacts, 100% tin over a nickel undercoating. * Suggested temperature soldering profile is shown page 28. * Recommended storage and operating temperature range is -40 0C to + 85 0C. * The Fair-Rite Products CD-ROM has a number of typical performance curves for the ferrite and ceramic multi-layer chip inductors. * The new "Chip Inductor Kit" (part number 0199000035) contains a cross section of both types of multi-layer chip inductors. See page 68.
Part Number Sytem: Example 2212061R2K7F
22
Multi-Layer Chip Inductor
1206
Package Size
1R2
Inductance Code N = Decimal point for nH (4N7 = 4.7nH = 0.0047H) (47N = 47nH = 0.047H) R = Decimal point for H (>99nH) (R22 = 0.22H) (2R2 = 2.2H)
K
Inductance Tolerance S = 0.3nH J = 5% K = 10% M = 20%
7
Packaging Code 6 = Bulk Packed 7 = T&R (7") 8 = T&R (13")
F
Material Code F = Ferrite Body For general signal usage C = Ceramic Body For high frequency usage
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
61
Chip Inductors
C
B
A
D
Side View Land Pattern
Land Patterns V W ref
1.30 .051 1.70 .067 1.90 .075 2.80 .110
X
0.70 .028 1.00 .039 1.50 .059 1.80 .071
Y
0.90 .035 1.10 .043 1.30 .051 1.60 .063
Tape Width mm 8 8 8 8
Pitch mm 4 4 4 4
Parts per Reel 7" 10,000 4,000 4,000 3,000 13" N/A 10,000 10,000 10,000
0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216)
0.50.1 .020
0.50.1 .020
1.00.1 0.250.15 .040 .010
0.002 0.006 0.01 0.03
0.40 .016 0.60 .024 0.60 .024 1.20 .047
0.80.15 0.80.15 1.60.15 0.40.2 .031 .063 .016 .031 See Part 1.250.2 2.00.2 .049 .079 Table 1.10.3 .043 1.60.2 .063 3.20.2 .126
0.50.3 .020 0.70.3 .028
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
62
15th Edition
Chip Inductors (Ferrite)
Package Size - 0603
Part Number Inductance (H) Tolerance Q Min Test Frequency L, Q (MHz) Self Resonant Frequency (Min MHz) DCR (Ohm) Max Rated Current (mA Max)
22060347NM7F 22060368NM7F 22060382NM7F 220603R10K7F 220603R12K7F 220603R15K7F 220603R18K7F 220603R22K7F 220603R27K7F 220603R33K7F 220603R39K7F 220603R47K7F 220603R56K7F 220603R68K7F 220603R82K7F 2206031R0K7F 2206031R2K7F 2206031R5K7F 2206031R8K7F 2206032R2K7F 2206032R7K7F 2206033R3K7F 2206033R9K7F 2206034R7K7F 2206035R6K7F 2206036R8K7F 2206038R2K7F 22060310RK7F 22060312RK7F 22060315RK7F
0.047 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15
20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%
10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 35 35 35 35 35 35 35 35 35 35 35 35 30 30 20
50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1
260 250 245 240 205 180 165 150 136 125 110 105 95 90 85 75 65 60 55 50 45 40 35 33 22 20 18 17 15 14
0.30 0.30 0.30 0.50 0.50 0.60 0.60 0.80 0.80 0.85 1.00 1.35 1.55 1.70 2.10 0.60 0.80 0.80 0.95 1.15 1.35 1.55 1.70 2.10 1.55 1.70 2.10 1.85 2.10 1.70
50 50 50 50 50 50 50 50 50 35 35 35 35 35 35 25 25 25 25 15 15 15 15 15 5 5 5 3 3 1
www..com for typical performance curves. Click on part number
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
63
Chip Inductors (Ferrite)
Package Size - 0805
Part Number Inductance (H) Q Tolerance Min Test Frequency L, Q (MHz) Self Resonant Frequency (Min MHz) DCR (Ohm) Max Rated Current (mA Max) A dim (mm)
22080547NM7F 22080568NM7F 22080582NM7F 220805R10K7F 220805R12K7F 220805R15K7F 220805R18K7F 220805R22K7F 220805R27K7F 220805R33K7F 220805R39K7F 220805R47K7F 220805R56K7F 220805R68K7F 220805R82K7F 2208051R0K7F 2208051R2K7F 2208051R5K7F 2208051R8K7F 2208052R2K7F 2208052R7K7F 2208053R3K7F 2208053R9K7F 2208054R7K7F 2208055R6K7F 2208056R8K7F 2208058R2K7F 22080510RK7F 22080512RK7F 22080515RK7F 22080518RK7F www..com 22080522RK7F 22080527RK7F 22080533RK7F 22080539RK7F 22080547RM7F
0.047 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47
20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20%
15 15 15 20 20 20 20 20 20 20 25 25 25 25 25 45 45 45 45 45 45 45 45 45 50 50 50 50 50 30 30 30 30 30 35 35
50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 0.4 2 2
320 280 255 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 41 38 35 32 29 26 24 22 19 18 16 14 13 8 7.5
0.20 0.20 0.20 0.30 0.30 0.40 0.40 0.50 0.50 0.55 0.65 0.65 0.75 0.80 1.00 0.40 0.50 0.50 0.60 0.65 0.75 0.80 0.90 1.00 0.90 1.00 1.10 1.15 1.25 0.80 0.90 1.10 1,15 1.25 2.90 3.00
300 300 300 250 250 250 250 250 250 250 200 200 150 150 150 50 50 50 50 30 30 30 30 30 15 15 15 15 15 5 5 5 5 5 4 4
0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 0.850.2 (.033") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049") 1.250.2 (.049")
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
Click on part number for typical performance curves.
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
64
15th Edition
Chip Inductors (Ferrite)
Package Size - 1206
Part Number Inductance (H) Tolerance Q Min Test Frequency L, Q (MHz) Self Resonant Frequency (Min MHz) DCR (Ohm) Max Rated Current (mA Max)
22120647NM7F 22120668NM7F 22120682NM7F 221206R10K7F 221206R12K7F 221206R15K7F 221206R18K7F 221206R22K7F 221206R27K7F 221206R33K7F 221206R39K7F 221206R47K7F 221206R56K7F 221206R68K7F 221206R82K7F 2212061R0K7F 2212061R2K7F 2212061R5K7F 2212061R8K7F 2212062R2K7F 2212062R7K7F 2212063R3K7F 2212063R9K7F 2212064R7K7F 2212065R6K7F 2212066R8K7F 2212068R2K7F 22120610RK7F 22120612RK7F 22120615RK7F 22120618RK7F www..com 22120622RK7F 22120627RK7F 22120633RK7F 22120639RK7F 22120647RK7F
0.047 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47
20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%
20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 45 45 45 45 45 45 45 45 45 50 50 50 35 50 35 35 35 35 35 40 40
50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 0.4 2 2
320 280 255 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 41 38 35 32 29 26 24 22 19 18 16 14 13 11 10
0.15 0.25 0.25 0.25 0.30 0.30 0.40 0.40 0.50 0.60 0.50 0.60 0.70 0.80 0.90 0.40 0.50 0.50 0.50 0.60 0.60 0.70 0.80 0.90 0.70 0.80 0.90 1.00 1.05 0.70 0.70 0.90 0.90 1.05 3.00 3.40
300 300 300 250 250 250 250 250 250 250 200 200 150 150 150 100 100 50 50 50 50 50 50 50 25 25 25 25 15 5 5 5 5 5 10 10
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
Click on part number for typical performance curves.
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
15th Edition
65
Chip Inductors (Ceramic)

Click on part number for typical performance curves.
www..com
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
66
15th Edition
Chip Inductors (Ceramic)
Package Size - 0603
Part Number Inductance
(nH)
Tolerance
Q Min
Test Frequency L, Q (MHz)
Self Resonant Frequency (Min MHz)
DCR (Ohm) Max
Rated Current (mA Max)
0.3 nH 2206031N0S7C 1.0 0.3 nH 2206031N2S7C 1.2 0.3 nH 2206031N5S7C 1.5 0.3 nH 2206031N8S7C 1.8 0.3 nH 2206032N2S7C 2.2 0.3 nH 2206032N7S7C 2.7 0.3 nH 2206033N3S7C 3.3 3.9 0.3 nH 2206033N9S7C 4.7 0.3 nH 2206034N7S7C 5.6 0.3 nH 2206035N6S7C 6.8 5% 2206036N8J7C 8.2 5% 2206038N2J7C 10 22060310NJ7C 5% 12 5% 22060312NJ7C 15 5% 22060315NJ7C 5% 22060318NJ7C 18 22060322NJ7C 5% 22 27 5% 22060327NJ7C 5% 22060333NJ7C 33 5% 22060339NJ7C 39 5% 22060347NJ7C 47 5% 22060356NJ7C 56 68 5% 22060368NJ7C 82 5% 22060382NJ7C 100 5% 220603R10J7C 120 220603R12J7C Click on part number for typical performance 5% curves. 150 5% 220603R15J7C 180 220603R18J7C 5% 5% 220 220603R22J7C
www..com
8 8 8 8 8 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 8 8 8 8
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50
4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 3000 2000 2000 2000 1000 1000 1000 1000 1000 1000 1000 1000 800 800 700 600
0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.14 0.16 0.18 0.22 0.24 0.26 0.28 0.32 0.35 0.40 0.45 0.55 0.60 0.70 0.75 0.85 0.95 1.00 1.20 1.20 1.30 1.30
300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300
Fair-Rite Products Corp.
Phone: (888) FAIR RITE / (845) 895-2055 * FAX: (888) FERRITE / (845) 895-2629 (888) 324-7748 (888) 337 -7483
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
* www.fair-rite.com * E-Mail: ferrites@fair-rite.com
Click on part number to return to catalog.
2504021007Y0
20 16 Z,RS,XL (ohm) 12 8 XL 4 0 106 Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
20 16
0mA
Z (ohm)
12
200mA
8 4
500mA
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2504021217Y0
200 160 Z,RS,XL (ohm) 120 RS 80 Z 40 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200 160 Z (ohm) 120
100mA
0mA
80 40
200mA
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2504023017Y0
600 500 Z,RS,XL (ohm) Z 400 300 200 XL 100 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
600 500 400 Z (ohm) 300 200 100
www..com
0mA
50mA
100mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2504026007Y0
120 100 Z,RS,XL (ohm) Z 80 RS 60 40 XL 20 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100
0mA
80 Z (ohm)
50mA
60
100mA
40
200mA
20
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2504026017Y0
1000 800 Z,RS,XL (ohm) 600 400 200 0 106
RS Z
XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
1000 800 Z (ohm) 600
25mA 0mA
400 200
50mA
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506030707H0
48 40 Z,RS,XL (ohm) 32 24 16 XL 8 0 107 Z RS
108 109 Frequency(Hz)
1010
Impedance, reactance, and resistance vs. frequency.
48 40 32 Z (ohm) 24 16 8
www..com
0mA 700mA
0 107
108 109 Frequency(Hz)
1010
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031007H0
60 50 Z,RS,XL (ohm) 40 30 20 10 0 107 Z XL RS
108 109 Frequency(Hz)
1010
Impedance, reactance, and resistance vs. frequency.
60 50 40 Z (ohm) 30 20 10
www..com
0mA
700mA
0 107
108 109 Frequency(Hz)
1010
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031017Y0
150 120 Z,RS,XL (ohm) Z 90 60 XL 30 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
150 120 Z (ohm) 90 60 30
www..com
0mA
100mA 200mA
400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031027Y0
1500 1200 Z,RS,XL (ohm) RS 900 600 300 XL 0 106 107 108 Frequency(Hz) 109 Z
Impedance, reactance, and resistance vs. frequency.
1500
0mA
1200 Z (ohm) 900 600 300
www..com
100mA
300mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031217Y0
180 150 Z,RS,XL (ohm) 120 90 60 30 0 106 107 108 Frequency(Hz) 109 Z XL RS
Impedance, reactance, and resistance vs. frequency.
180 150 120 Z (ohm) 90 60 30
www..com
0mA
100mA 200mA
400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031217Y0
180 150 Z,RS,XL (ohm) 120 90 60 30 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
180 150
0mA
120 Z (ohm) 90 60 30
www..com
100mA 200mA
400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031217Y2
150 120 Z,RS,XL (ohm) 90 60 30 0 106 Z XL
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
150 120 Z (ohm) 90 60 30
www..com
0A
.1A
.2A .5A 2A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031217Z0
360 300 Z,RS,XL (ohm) 240 Z 180 120 XL 60 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
360 300 240 Z (ohm) 180
200mA 0mA
120 60
www..com
450mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506031517Y0
200 Z 160 Z,RS,XL (ohm) 120 80 40 0 106 RS
XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200
0mA
160
100mA
Z (ohm)
120
200mA
80
300mA
40
www..com
400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506032217H0
Not yet available.
Impedance, reactance, and resistance vs. frequency.
Not yet available.
www..com
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506033007Y0
50 40 Z,RS,XL (ohm) Z 30 20 10 0 106 XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
50 40 Z (ohm) 30 20 10
www..com
0mA 100mA 200mA 300mA 400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506033007Y3
40 32 Z,RS,XL (ohm) 24 16 8 0 106 RS
Z
XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
40
0A
32 Z (ohm) 24 16 8
www..com
.5A 1A 1.5A 3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506033017Y0
400 320 Z,RS,XL (ohm) RS 240 160 80 0 106
Z
XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
400
0A
320 Z (ohm) 240 160 80
www..com
.1A
.2A
.4A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506033017Z0
600 500 Z,RS,XL (ohm) 400 300 200 100 0 106 XL 107 108 Frequency(Hz) 109 Z RS
Impedance, reactance, and resistance vs. frequency.
600 500 400 Z (ohm) 300 200 100
www..com
0mA
100mA 200mA 300mA 450mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506033317H0
2500 2000 Z,RS,XL (ohm) 1500 1000 Z 500 RS 0 106 107 108 Frequency(Hz) XL 109
Impedance, reactance, and resistance vs. frequency.
2500
0mA
2000 Z (ohm)
www..com
1500 1000 500
50mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506036007Y0
120 100 Z,RS,XL (ohm) 80 60 40 20 0 106 Z XL
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100
0mA
80 Z (ohm)
100mA
60
200mA
40 20
www..com
400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506036007Y3
100 80 Z,RS,XL (ohm) 60 40 20 0 106 Z RS XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80
0A
Z (ohm)
60 40
.1A .2A 1.5A .5A
20
www..com
3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506036007Z0
180 150 Z,RS,XL (ohm) 120 90 60 XL 30 0 106 Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
180 150 120 Z (ohm) 90
200mA 0mA
60 30
www..com
300mA 450mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506036017Y0
750 600 Z,RS,XL (ohm) 450 300 150 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
750 600 Z (ohm) 450 300
200mA 0mA
100mA
150
www..com
400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2506038007Y0
180 150 Z,RS,XL (ohm) 120 90 60 30 0 106 Z RS
XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
180 150 120 Z (ohm) 90 60
200mA 0mA
100mA
30
www..com
400mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508050507H0
30 24 Z,RS,XL (ohm) 18 Z 12 XL 6 0 107
RS
108 109 Frequency(Hz)
1010
Impedance, reactance, and resistance vs. frequency.
30 24 Z (ohm) 18
0mA
500mA
12 6
www..com
0 107
108 109 Frequency(Hz)
1010
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051017Y0
150 120 Z,RS,XL (ohm) Z 90 60 XL 30 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
150 120 Z (ohm) 90 60
300mA
0mA 100mA 200mA
30
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051027Y0
1000 800 Z,RS,XL (ohm) 600 400 200 0 106 XL 107 108 Frequency(Hz) 109 Z RS
Impedance, reactance, and resistance vs. frequency.
1000 800 Z (ohm) 600 400 200
www..com
0mA
50mA 200mA 100mA 300mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051027Y1
1000 800 Z,RS,XL (ohm) RS 600 Z 400 200 XL 0 106 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
1000 800
0A
.1A
Z (ohm)
600 400 200
.2A .5A 1A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051107Y0
20 16 Z,RS,XL (ohm) Z 12 8 4 0 106 RS XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
20 16
0mA
Z (ohm)
12
300mA
8 4
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051217Y0
180 150 Z,RS,XL (ohm) 120 RS 90 Z 60 XL 30 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
180 150 120 Z (ohm) 90 60
300mA 0mA
100mA 200mA
30
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051217Y3
200 160 Z,RS,XL (ohm) Z 120 80 XL 40 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200 160 Z (ohm) 120 80
.5A
0A .1A .2A
40
www..com
0 106
1A 2A 3A
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051217Y6
200 160 Z,RS,XL (ohm) 120 RS 80 Z 40 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200 160
0A
Z (ohm)
120 80
.5A
40
www..com
1A 2A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051217Z0
250 200 Z,RS,XL (ohm) 150 100 50 0 106 Z RS
XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
250 200
0mA
Z (ohm)
150 100
250mA 350mA
450mA
50
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051527Y0
1800 1500 Z,RS,XL (ohm) 1200 900 Z 600 300 0 106 RS XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
1800 1500 1200 Z (ohm) 900
100mA 0mA
50mA
600 300
www..com
200mA 300mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508051817Y0
300 240 Z,RS,XL (ohm) 180 120 60 0 106 Z XL
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
300 240 Z (ohm) 180 120
300mA 0mA
100mA 200mA
60
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508052027Y1
2000 1600 Z,RS,XL (ohm) Z 1200 800 400 RS 0 106 107 108 Frequency(Hz) 109 XL
Impedance, reactance, and resistance vs. frequency.
2000 1600 Z (ohm) 1200 800 400
www..com
0A .1A
.2A
.5A 1A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508052027Z0
2000 1600 Z,RS,XL (ohm) 1200 800 400 RS 0 106 107 108 Frequency(Hz) 109 XL
Z
Impedance, reactance, and resistance vs. frequency.
2000 1600 Z (ohm) 1200 800 400
www..com
0mA
100mA
200mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508053007Y0
75 60 Z,RS,XL (ohm) 45 30 Z 15 0 106 XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
75 60 Z (ohm) 45 30
300mA 0mA
15
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508053007Y3
40 32 Z,RS,XL (ohm) 24 RS 16 8 0 106 XL
Z
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
40 32 Z (ohm) 24 16 8
www..com
0A
.5A 1A 2A 3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508053017Y0
360 300 Z,RS,XL (ohm) 240 180 Z 120 60 0 106 XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
360 300 240 Z (ohm) 180 120 60
www..com
0mA
100mA 200mA
300mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508053017Y3
360 300 Z,RS,XL (ohm) RS 240 180 120 60 0 106 XL Z
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
360 300 240 Z (ohm) 180 120 60
www..com
0A .1A
.2A
.5A 1A 2A 3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508053017Z0
500 Z 400 Z,RS,XL (ohm) 300 200 100 0 106 XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
500 400 Z (ohm) 300
0mA
200mA
200 100
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508055007Y0
75 60 Z,RS,XL (ohm) Z 45 30 15 0 106 RS XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
75 60
0mA
Z (ohm)
45 30 15
300mA
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508056007Y0
120 100 Z,RS,XL (ohm) 80 60 40 20 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100 80 Z (ohm) 60 40 20
www..com
0mA 100mA 200mA 300mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508056007Y3
100 80 Z,RS,XL (ohm) 60 40 XL 20 0 106
Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80 Z (ohm) 60 40 20
2A
www..com
0A .1A .2A .5A 1A
0 106
3A
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508056007Y6
100 80 Z,RS,XL (ohm) 60 RS 40 20 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80 Z (ohm) 60 40 20
3A
www..com
0A
.1A .2A .5A 1A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508056007Z0
120 100 Z,RS,XL (ohm) 80 Z 60 40 20 0 106 RS
XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100 80 Z (ohm) 60 40 20
www..com
0mA
300mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508056017Y0
750 600 Z,RS,XL (ohm) 450 300 150 0 106 Z XL
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
750
0mA
600 Z (ohm) 450
100mA
300mA
300 150
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508056017Y2
750 600 Z,RS,XL (ohm) 450 Z 300 150 0 106
RS
XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
750 600
0A
.1A
Z (ohm)
450
.2A
300 150
.5A 1A 2A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2508059007Y0
120 100 Z,RS,XL (ohm) 80 60 Z 40 XL 20 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100 80 Z (ohm) 60 40 20
www..com
0mA
100mA 200mA 300mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061017Y0
150 120 Z,RS,XL (ohm) 90 60 30 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
150 120 Z (ohm) 90 60
450mA 0mA 150mA 250mA
30
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061027Y0
1200 1000 Z,RS,XL (ohm) 800 600 400 RS 200 XL 0 106 107 108 Frequency(Hz) 109 Z
Impedance, reactance, and resistance vs. frequency.
1200 1000 800 Z (ohm)
0mA
600
50mA
400 200
www..com
150mA 250mA 350mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061027Y0A4
1200 1000 Z,RS,XL (ohm) RS 800 600 Z 400 200 XL 0 106 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
1200 1000 800 Z (ohm) 600 400 200
www..com
0mA
50mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061027Y1
1200 1000 Z,RS,XL (ohm) 800 600 Z 400 RS 200 0 106 XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
1200 1000 800 Z (ohm) 600
0A
400 200
www..com
.1A .2A
.5A
1A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061217Y0
180 150 Z,RS,XL (ohm) 120 RS 90 60 30 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
180
0mA
150 120 Z (ohm) 90 60 30
www..com
250mA
450mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061217Y0A4
250 200 Z,RS,XL (ohm) 150 Z 100 XL 50 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
250 200
0mA
Z (ohm)
150 100
75mA
150mA
50
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061217Y5
200 160 Z,RS,XL (ohm) 120 80 40 0 106 Z XL
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200 160
0A
Z (ohm)
120 80 40
.2A
.5A 1A 2.5A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061217Z0A4
250 200 Z,RS,XL (ohm) 150 100 XL 50 0 106 Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
250 200
0mA
Z (ohm)
150
100mA
100
200mA
50
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061517Y3
250 200 Z,RS,XL (ohm) 150 100 Z 50 0 106 XL
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
250 200
0A
Z (ohm)
150 100 50
.2A
.5A 1A 2A
www..com
0 106
3A
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512061527Y0
2500 2000 Z,RS,XL (ohm) 1500 1000 500 0 106 XL RS 107 108 Frequency(Hz) 109
Z
Impedance, reactance, and resistance vs. frequency.
2500 2000 Z (ohm) 1500 1000
150mA 0mA 50mA
500
www..com
250mA 350mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512062217Z0A4
500 400 Z,RS,XL (ohm) Z 300 RS 200 100 XL 0 106 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
500 400 Z (ohm) 300 200
150mA
0mA
100
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512063007Y0
40 32 Z,RS,XL (ohm) 24 16 8 0 106 XL Z
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
40
0mA
32
400mA
Z (ohm)
24
800mA
16 8
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512063007Y3
60 50 Z,RS,XL (ohm) 40 30 20 10 0 106 XL Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
60 50
0A
40 Z (ohm)
.5A
30 20 10
1A 2A
3A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512063017Y0
400 320 Z,RS,XL (ohm) 240 160 80 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
400 320
0mA
150mA
Z (ohm)
240
250mA
160
350mA
80
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512063017Y0A4
500 400 Z,RS,XL (ohm) 300 200 100 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
500 400 Z (ohm) 300
75mA 0mA
200 100
150mA
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512063017Y3
400 320 Z,RS,XL (ohm) 240 160 80 0 106 Z XL
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
400
0A
320 Z (ohm) 240
.2A
.5A
160
1A
80
www..com
2A 3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512065007Y0
80 Z
60 Z,RS,XL (ohm)
40
RS
20
XL
0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
80
0mA
60 Z (ohm)
400mA
40
800mA
20
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512065007Y0
80 Z
60 Z,RS,XL (ohm)
40
RS
20
XL
0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
80
0mA
60 Z (ohm)
400mA
40
800mA
20
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512065007Y3
100 80 Z,RS,XL (ohm) 60 40 20 0 106 XL Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80
0A
Z (ohm)
60
.2A
40 20
.5A 1A 3A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512065007Y6
100 80 Z,RS,XL (ohm) Z 60 RS 40 XL 20 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80 Z (ohm) 60 40
1A
0A .2A .5A
20
www..com
2A 3A
0 106
5A
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512066007Y0A4
100 80 Z,RS,XL (ohm) 60 RS 40 20 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80
0mA
Z (ohm)
60
100mA
40
200mA
20
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512066017Y0
750 600 Z,RS,XL (ohm) 450 300 150 0 106
Z RS
XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
750
0mA
600 Z (ohm) 450
150mA
300
350mA
150
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512066017Y0A4
750 600 Z,RS,XL (ohm) 450 Z 300 150 0 106
RS
XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
750
0mA
600 Z (ohm) 450 300
50mA
100mA
150
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512066017Y1
750 600 Z,RS,XL (ohm) 450 300 150 0 106 XL 107 108 Frequency(Hz) 109 Z
RS
Impedance, reactance, and resistance vs. frequency.
750
0A
600
.1A
Z (ohm)
450 300
.2A .5A
1A
150
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512067007Y0
120 100 Z Z,RS,XL (ohm) 80 60 40 XL 20 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100 80 Z (ohm)
200mA 0mA
60 40 20
500mA
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512067007Y3
120 100 Z,RS,XL (ohm) Z 80 60 40 20 0 106 XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100
0A
80 Z (ohm) 60 40 20
www..com
.2A .5A 1A 2A 3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2512069007Y0
150 120 Z,RS,XL (ohm) Z 90 RS 60 XL 30 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
150 120 Z (ohm) 90 60 30
www..com
0mA 150mA 250mA
450mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518061017Y0
200 160 Z,RS,XL (ohm) 120 80 40 0 106 Z RS XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200 160
0A
Z (ohm)
120 80
200mA
400mA
40
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518061017Y6
150 120 Z,RS,XL (ohm) 90 RS 60 30 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
150 120 Z (ohm) 90 60 30
www..com
0A .2A .5A 1A 2A 3A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518061517Y0
240 200 Z,RS,XL (ohm) 160 120 80 40 0 106 XL Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
240 200 160 Z (ohm) 120 80 40
www..com
0mA
200mA
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518065007Y6
75 Z 60 Z,RS,XL (ohm) 45 30 15 0 106 XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
75
0A
60
.5A
Z (ohm)
45
1A
30 15
2A 3A
www..com
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518066007Y3
120 100 Z,RS,XL (ohm) 80 60 40 20 0 106 XL Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100 80 Z (ohm) 60 40 20
www..com
0A .5A 1A 2A 3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518068007Y3
120 100 Z,RS,XL (ohm) Z 80 60 40 XL 20 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100
0A
80 Z (ohm)
.2A
60 40 20
.5A 1A 2A 3A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518121217Y3
180 150 Z,RS,XL (ohm) 120 90 Z 60 XL 30 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
180 150 120 Z (ohm) 90
1A 0A .2A .5A
60 30
www..com
2A 3A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518121217Y6
180 150 Z,RS,XL (ohm) 120 RS 90 Z 60 30 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
180 150 120 Z (ohm) 90
1A 0A .2A .5A
60 30
www..com
2A 3A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2518127007Y3
100 80 Z,RS,XL (ohm) Z 60 RS 40 XL 20 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80
0A
Z (ohm)
60 40 20
.5A 1A 2A 3A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2743019447
50 40 Z,RS,XL (ohm) 30 Z 20 10 0 106 XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
60 50 40 Z (ohm) 30
1A 0A .2A .5A
20
2A
10
www..com
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2743021447
120 100 Z,RS,XL (ohm) 80 60 40 XL 20 0 106 Z RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100 80 Z (ohm)
.5A 0A .2A
60 40 20
1A 2A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2743037447
120 100 Z,RS,XL (ohm) RS 80 60 40 XL 20 0 106 Z
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120
0A
100 80 Z (ohm) 60 40 20
www..com
.2A .5A 1A 2A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744040447
75 60 Z,RS,XL (ohm) RS 45 30 15 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
2744040447
75 60 Z (ohm) 45 30 15
5A
www..com
0A
.2A .5A 1A 2A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744041447
60 50 Z,RS,XL (ohm) 40 30 20 10 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
60 50 40 Z (ohm) 30 20 10
www..com
0A .5A 1A 2A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744044447
40 RS 32 Z,RS,XL (ohm) 24 Z 16 XL 8 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
40 32 Z (ohm) 24
0A .2A .5A
1A
16
2A
8
www..com
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744045447
100 80 Z,RS,XL (ohm) Z 60 RS 40 XL 20 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80
0A
Z (ohm)
60 40 20
.5A 1A 2A 3A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744051447
400 320 Z,RS,XL (ohm) 240 160 80 0 106 Z RS XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
400 320 Z (ohm) 240 160 80
www..com
0A .5A 1A 2A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744065447
500 400 Z,RS,XL (ohm) Z 300 RS 200 100 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
500 400 Z (ohm) 300 200 100
www..com
0A 1A 2A
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744555567
400 RS 320 Z,RS,XL (ohm) 240 Z 160 80 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
400 320 Z (ohm) 240
0A 1A .2A .5A
160
2A
80
5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744555577
800
600 Z,RS,XL (ohm) RS 400 Z
200 XL 0 106 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
2744555577
800
0A .2A .5A
600 Z (ohm)
400
1A 2A
200
5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744770347
400 320 Z,RS,XL (ohm) RS 240 Z 160 80 XL 0 106 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
400
0A
320 Z (ohm) 240 160
.5A 1A 2A 5A
80
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744776147
400 320 Z,RS,XL (ohm) 240 160 80 0 106 Z RS
XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
400 320 Z (ohm) 240 160 80
www..com
0A .2A .5A 1A 2A
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744778147
400 320 Z,RS,XL (ohm) 240 160 80 0 106 Z RS
XL 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
400 320 Z (ohm) 240 160 80
www..com
0A .2A .5A 1A 2A
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744778347
400 320 Z,RS,XL (ohm) RS 240 Z 160 80 XL 0 106 107 108 Frequency(Hz) 109
Impedance, reactance, and resistance vs. frequency.
400
0A
320 Z (ohm) 240 160
.5A 1A 2A 5A
80
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744780347
240 200 Z,RS,XL (ohm) RS 160 120 80 40 0 106 XL Z
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
240 200 160 Z (ohm) 120 80 40
www..com
0A .5A 1A 2A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744786147
200 160 Z,RS,XL (ohm) 120 80 40 0 106 XL
RS Z
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200
0A
160 Z (ohm) 120 80 40
.2A .5A 1A
2A 3A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744788147
200 160 Z,RS,XL (ohm) 120 80 40 0 106 XL
RS Z
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
200
0A
160 Z (ohm) 120 80 40
.2A .5A 1A
2A 3A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2744788347
240 200 Z,RS,XL (ohm) RS 160 120 80 40 0 106 XL Z
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
240 200 160 Z (ohm) 120 80 40
www..com
0A .5A 1A 2A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752041447
75 60 Z,RS,XL (ohm) 45 30 15 0 106 XL
Z
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
75 60 Z (ohm) 45 30 15
www..com
0A 1A 2A 3A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752045447
120 100 Z,RS,XL (ohm) 80 60 40 20 0 106 Z RS XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100 80 Z (ohm) 60 40
5A 0A 2A 1A 3A
20
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752051447
500 400 Z,RS,XL (ohm) 300 Z RS 200 100 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
500 400 Z (ohm) 300 200 100
www..com
0A 1A 2A 3A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752065447
600 500 Z,RS,XL (ohm) 400 Z 300 200 XL 100 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
600 500 400 Z (ohm)
0A
300 200 100
1A 3A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752555567
600 500 Z,RS,XL (ohm) Z 400 RS 300 200 100 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
600 500
0A
400 Z (ohm) 300 200 100
www..com
.5A 1A 2A 3A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752555577
900 750 Z,RS,XL (ohm) 600 450 300 150 0 106 Z XL RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
900 750
0A
.5A
600 Z (ohm) 450 300
3A 1A 2A
150
www..com
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752770347
480 400 Z,RS,XL (ohm) 320 RS 240 160 80 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
480 400 320 Z (ohm) 240 160
5A 0A 1A 2A 3A
80
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752776147
480 400 Z,RS,XL (ohm) Z 320 240 160 XL 80 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
480 400 320 Z (ohm) 240 160 80
www..com
0A 1A 2A 3A
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752778147
480 400 Z,RS,XL (ohm) Z 320 240 160 XL 80 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
480 400 320 Z (ohm) 240 160 80
www..com
0A 1A 2A 3A
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752778347
480 400 Z,RS,XL (ohm) 320 RS 240 160 80 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
480 400 320 Z (ohm) 240 160
5A 0A 1A 2A 3A
80
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752780347
300 240 Z,RS,XL (ohm) Z 180 RS 120 XL 60 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
300 240 Z (ohm) 180 120 60
www..com
0A 1A 2A 3A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752786147
250 200 Z,RS,XL (ohm) Z 150 RS 100 50 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
250 200
0A
Z (ohm)
150 100
1A 2A 3A
50
www..com
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752788147
250 200 Z,RS,XL (ohm) Z 150 RS 100 50 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
250 200
0A
Z (ohm)
150 100
1A 2A 3A
50
www..com
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2752788347
300 240 Z,RS,XL (ohm) Z 180 RS 120 XL 60 0 106
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
300 240 Z (ohm) 180 120 60
www..com
0A 1A 2A 3A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2761019447
60 50 Z Z,RS,XL (ohm) 40 RS 30 20 10 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
60 50
0A
40 Z (ohm)
1A
30 20
2A 3A 5A
10
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2761021447
120 100 Z Z,RS,XL (ohm) 80 RS 60 40 20 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
120 100
0A
80 Z (ohm)
1A
60 40 20
2A 3A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2773019447
50 40 Z,RS,XL (ohm) RS 30 20 10 0 106 Z XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
50 40 Z (ohm) 30 20 10
www..com
0A
.2A .5A
1A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2773021447
100 Z 80 Z,RS,XL (ohm) 60 40 XL 20 0 106 RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100
0A
80 Z (ohm) 60 40 20
www..com
.2A .5A
1A 5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2773037447
100 80 Z,RS,XL (ohm) 60 Z 40 XL 20 0 106
RS
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
100 80 Z (ohm) 60
0A .2A
.5A
40
1A
20
www..com
5A
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on part number to return to catalog.
2773044447
50 40 Z,RS,XL (ohm) Z 30 RS 20 10 0 106 XL
107 108 Frequency(Hz)
109
Impedance, reactance, and resistance vs. frequency.
50 40
0A
Z (ohm)
30 20 10
.2A .5A 1A 5A
www..com
0 106
107 108 Frequency(Hz)
109
Impedance vs. frequency with dc bias.
Click on heading to return to catalog.
T y pic al 0402 C hip Induc tors (C eramic )
Q
www..com
Click on heading to return to catalog.
T y pic al 0603 C hip Induc tors (C eramic )
Q
www..com
Click on heading to return to catalog.
T y pic al 0805 C hip Induc tors (C eramic )
Q
www..com
T y pic al 0603 C hip Induc tors (F errite)
Click on heading to return to catalog.
www..com
Q
T y pic al 0805 C hip Induc tors (F errite)
Click on heading to return to catalog.
www..com
Q
T y pic al 1206 C hip Induc tors (F errite)
Click on heading to return to catalog.
www..com
Q

▲Up To Search▲

Price & Availability of 2504021007Y0

	To Download 2504021007Y0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .